How to Clean a Bathroom: An Expert Guide

0

Cleaning the bathroom is the most dreaded of all household chores, not helped by the fact that most homes have more than one, nor that bathrooms need to be cleaned very regularly to stay at once. welcoming and hygienic.

However, no matter how many bathroom ideas you have or how beautiful the resulting bathroom space is, if it isn’t sparkling clean, it won’t be relaxing or enjoyable to stay in. use.

The good news is that you don’t need any specialized tools or equipment to clean a bathroom. A few cleaning rags, an old toothbrush, a mop and a bucket are all you really need – and some great cleaning tips, of course.

With so many hard surfaces in the bathroom, it’s worth learning how to clean a bathroom with vinegar and making your own chemical-free cleaning spray that cleans dirt and naturally sanitizes.

How to clean a bathroom

egg shaped bathroom in a white and marble bathroom

(Image credit: BC Designs)

When planning to clean a bathroom, the best method is to break the chore down into manageable steps. This will make the job less daunting, and by working logically from ceiling to floor, you’ll make sure you don’t mess up any areas you’ve already cleaned in the process.

“It also helps with minimal day-to-day maintenance cleaning,” adds Trinity Owhe, design expert, Victorian Plumbing. “Little things you can do throughout the week, like using a squeegee on the screen after showering and rinsing toothpaste from sinks, will help make deeper cleans less grueling.”

We’ve got more expert advice in our 10-step guide to deep cleaning your bathroom, below.

1. Declutter Surfaces

It’s much easier to clean a bathroom if you’re not working around a mountain of toiletries and other bathroom accessories, so decluttering is always your first task. Clean everything on surfaces, including around the tub, and put away anything that isn’t used frequently if possible. Empty the trash and put empty shampoo bottles and toilet paper rolls in the recycling bins. Put the towels and the bath mat in the laundry basket.

2. Check the drains

This step might not be necessary every time, but if you find yourself in an inch of water when you shower or your tub takes forever to drain, it’s worth flushing the drains.

“The most common cause of these blockages is a buildup of hair, grease, and soap scum. If left untreated, slowly draining water can leave a slippery surface in your bathtub or sink. shower, which could be a potential slip hazard,” says James Roberts, Manager, Sanctuary Bathrooms. “To solve the problem, first remove all visible and accessible blockages from the drain hole, then test to see if it has worked by pouring water down the drain.

“If that doesn’t unblock your drain, try using vinegar and baking soda.” Mixing club soda and vinegar creates a bubbling reaction that can really help move buildup. This simple household trick is a cheap and safe alternative to stronger chemicals,” adds James.

If the blockage persists, try using a plumber’s snake (available on Amazon or your local hardware store) to dislodge it. For a really stubborn blockage, you may need to resort to stronger chemicals.

3. Clean the toilet

Don’t put off toilet cleaning until the end; letting the toilet cleaner soak in the pot while you clean the rest of the bathroom will ensure sparkling results. Start at the toilet rim and seat, using an old toothbrush to get straight into the crevices around the seat hinges. Always keep separate rags for cleaning the main toilet bowl and seat, and use rubber gloves. You can use your usual bathroom linen on the trigger plate/button.

Pour toilet liquid around the bowl, up to the inside of the rim, then immerse the toilet brush in the water and let it sanitize for at least 10 minutes. Adding the toilet brush not only gives it a clean, but also serves as a reminder to others not to use the toilet if you leave the bathroom unattended! When the soaking period is over, grab the toilet brush and scrub the bowl well, getting as deep into the U-bend as possible, before flushing.

4. Break the dust

As with other rooms, one of the first steps in cleaning a bathroom is dusting. A damp cloth is all you need to dust horizontal surfaces, and you can use a vacuum cleaner with a nozzle to suck up cobwebs and remove dust from the exhaust vent and light shades.

“You want to get rid of loose dust and debris before you introduce liquid cleaners, especially on surfaces like the sink and tub surround, shelves, and any furniture,” says Trinity Owhe, design expert, Victorian Plumbing. “If this precaution is not taken, you are likely to end up with clumps of dust around your bathroom that are now sticky thanks to your cleaning products!”

5. Tackle Wall Tiles

Working from top to bottom, spray your tiles with a bleach-free cleaner and let it sit for a few minutes. Then wipe with a damp cloth or use the shower head to spray the tiles inside the shower area. Any splatter of soap or toothpaste may require additional muscle strength to clear. A soft-bristled dish brush can be helpful.

Clean the grout if it looks dirty by popping equal parts white vinegar and baking soda in a bowl and mix to make a paste. Take an old toothbrush and scrub the grout, then let it sit for up to 30 minutes. You can also use this mixture in the joint between the shower tray and the tiles if it is discolored. Wipe or spray the mixture, then dry the tiles with a microfiber cloth to prevent smudging.

6. Clean the remaining toilets

The type of cleaner you use on the sink and tub depends on the materials they are made from; most manufacturers will specify if there are specific cleaning products to avoid. Materials like composite stone and acrylic are particularly susceptible to damage from cleaners containing abrasive ingredients. Ceramic sinks are pretty bulletproof, but if you want to play it safe, stick to non-abrasive, bleach-free bathroom sprays, or electronic dusters, which don’t require any additional cleaning agents.

Once you’ve scrubbed the sink and tub thoroughly — again, your soft-bristled dish brush will come in handy — rinse with clean water and wipe dry with a microfiber cloth.

You may also need to know how to clean a shower head – the clue that this needs to be done is if the flow seems slower, weaker or if the direction of water movement changes in some of the holes in the shower head of shower.

7. Shine glass and mirrors

Soap, toothpaste, and limescale scum can all build up on glass surfaces in your bathroom. So you won’t just want to learn how to clean a streak-free mirror, but also the glass of a shower screen.

“There are many ways to clean glass shower enclosures – and the same technique works on both soap scum and hard water stains,” says Belinda Everingham, founder of Bondi Wash. “You need something abrasive to start with. Make your own screen scrub by mixing dish soap, baking soda, and vinegar (one part each), which will remove soap buildup and smudges. of water.

Rinse and wipe dry, then use your usual glass cleaner and a microfiber cloth, rubbing until the glass sparkles.

8. Wipe down the brassware

As you’ll be using the faucets and hand shower to rinse surfaces and rinse cloths as you go, brassware should be one of the last items in your bathroom cleaning schedule.

Most brass items simply require wiping with a damp cloth, followed by buffing with a microfiber cloth for extra shine. Be especially careful to avoid cleaning products with bleach on all brass finishes, and also avoid citric ingredients on all hot metals like copper and brass.

Many organic cleaners use citric acid instead of harsh chemicals, but on unlacquered brass i.e. “living finishes” they can brown and blacken the surface in a way very unattractive.

Don’t forget to clean the nozzles of the faucets, wiping away any accumulation of dirt, and do the same on the shower head. Most modern showerheads have easy-to-clean rubber nozzles that only require a simple wipe down for water to spray smoothly.

9. Clean the floor

Begin by vacuuming to remove dust, hair and other debris. Then, assuming your bathroom floor is a solid material like tile, laminate, or vinyl, clean it with warm water and an appropriate floor cleaner. If you have tile and the grout is dirty, repeat the cleaning recommendation in step 3.

Try not to leave the mop floor too wet by really wringing out the mop before the last pass; any pool of water can be very dangerous. If you’re worried, switch to a clean, dry mop head and use it to dry the floor.

10. Restore Order

All you have to do is replace the toiletries and toothbrushes you removed for cleaning and add some clean towels. “A few drops of your favorite essential oil down the toilet helps eliminate odors and will leave your bathroom feeling fresh and inviting,” adds Belinda from Bondi Wash.

You may also want to freshen towels, making sure you know how to soften towels when you wash them to give your clean bathroom the perfect finishing touch.

How often should you clean your bathroom?

Once a week is the generally accepted number of times to clean your bathroom, but use common sense. It’s usually very obvious that a bathroom needs cleaning, especially if there are children around who haven’t yet learned how to clean up after them. A guest bathroom that is not used frequently will not need to be cleaned as often.

What do professionals use to clean bathrooms?

Professional cleaners, especially those who work in the hospitality industry and therefore have to consider customers with potential allergies, tend to stick to old-fashioned, natural ingredients when cleaning bathrooms. .

We are of course referring to cleaning with vinegar and cleaning with lemon juice. If you want to do a truly professional job, check out the best steam cleaners, which take the muscle work out of removing grease and dirt from hard surfaces and are chemical-free too.

Share.

Comments are closed.